involight A-000000-05912, User Manual

Page: 13 / 28

12
1.2 Important safety instructions!
For your own safety, read this chapter first!
DANGER!
Electric shock due to improper mains connection
Only connect the device to a properly connected mains socket with a mains voltage of 230 V ~ / 50 Hz using
the supplied mains adapter. Do not make any changes to the plug-in power supply, cable or plug-in connector
and check the insulation of the cable regularly for damage. Do not immerse the appliance in water. Wipe only
with a slightly damp cloth. Failure to do so may result in electric shock, fire or life. In case of uncertainties,
contact an authorized electrician.
NOTE!
Disconnection from the mains
The mains plug is the main disconnect element. Disconnect the power supply to completely disconnect the
power source from the power source. Make sure that the outlet is near the unit and is easily accessible. Do not
use this unit near wet areas, such as: Sinks, bathtubs or ponds and lakes.
WARNING!
operating conditions
This product is designed for indoor use only.
Ensure that the mains adapter or its cable is never wet or wet during operation
Is moist. Do not place any objects filled with liquids, such as Cups or beer bottles, next to or on the appliance.
Avoid direct sunlight, strong dirt and strong vibrations. Always grasp the power adapter directly. Do not pull the
cord, or touch the AC adapter with wet hands as this can cause a short circuit or electric shock.
Scope of supply: 1x "DMXREC", 1x mains cable, 1x user manual.
Please check, if all parts are included in the package!
NOTE:
The power supply is placed in the side padding in a small, white carton!
1.3 Intended Use:
This information sheet contains important information on the safe operation of the device. Ensure that this
information is available to all persons using this device.
The type plate and serial number are located on the back of the unit.
The INVOLIGHT "DMXREC" DMX recorder is a light control unit that can be used to control DMX-controllable light
effects, in particular scanners, moving lights, but also spotlights and light effects as well as lasers, etc. This
appliance is not intended for home use and may only be operated by persons with the appropriate knowledge and
experience. Do not allow children to play or play with it.
The device is only approved for a current connection with alternating voltage, AC100-240V, 50 / 60Hz
Light controllers such as the "DMXREC" are sensitive and technically highly developed devices, which must be
handled carefully. Therefore, avoid vibrations and impacts during installation, dismantling and use of the device.
Use the "DMXREC" only in places that are protected from dust, moisture and excessive heat. The permissible
operating temperature must be in the range -5 ° to + 45 ° Celsius and the relative humidity must not exceed 50%
(at + 45 °)! Direct sunlight must be avoided during use and during transport. For the sake of your own safety and
those of other persons, make sure that no cables are around freely.
In the event of a thunderstorm, the device must be disconnected from the mains!
Always ensure that no liquid can enter the unit!
Do not use the "DMXREC" in professional applications unless you are familiar with the functions and are familiar
with the operation. Only allow other people to work with the device if you are sure that they are familiar with the
functions as well. In most cases, malfunctions are a result of a previous faulty operation.