19
Manual
PAN- TILT Time
0-255
Set the speed of the PAN / TILT movement
manually
Stop / Strobe
0-255
Strobe effect Set the speed manually
Dimmer
0-255
Set the dimmer intensity manually
Colour
0-255
Adjust the color wheel manually.
Gobo Change
0-255
Set gobo wheel, gobo shake manually.
Focus
0-255
Adjust focus manually
Prism Insertion
0-255
Adjust the 3-facet prism manually
Prism Rotation
0-255
Manually adjust the rotating 3-facet prism
Macro Function
0-255
Set macros manually
Reset
OK/Cancel
Carry out a reset manually
Colour2
0-255
Set split colors manually
Colour Time
0-255
Set color wheel speed manually
Prisma Time
0-255
Set the prism speed manually
Gobo Time
0-255
Set the gobo wheel speed manually
VER.
Software Version
Sys (System)
DMX Monitor
Current DMX values of the channels
System Errors
This function can be used to display error messages
Total Fixture Hour
With this function the operating hours of the device can be
displayed.
Partial Fixture Hour
This function can be used to display the device's temporary
operating hours since it was switched on
Input Password
Calibration
Menü Password
– Keyboard shortcut: UP, DOWN, UP, DOWN
Advance
3.2 Connections:
1. 3-pin XLR input socket for connecting a DMX control device (e.g. DMX mixer)
2. 3-pin XLR output socket for forwarding the DMX control signal
3. POWERCON-compatible mains power input.
4. POWERCON-compatible mains power output.
5. ON / OFF power switch.
6. Fuse holder for F4A 250V fuse.
When changing the fuse, always pull the mains plug and only use the specified fuse types!
DMX-Connections:
A three-pin XLR socket serves as a DMX output, a three-pin XLR plug serves as a DMX input.
1.
2.
3.
4.
5.
6.
