Preparation
•
Open the packaging
•
Once the lamp is removed from the box and before plugging in to a power outlet,
pull the bulb cap (
⑨
) upward to check if the bulb is in good condition. If yes, place
the bulb cap back into position and proceed to the next step. If not, please carefully
replace the light bulb.
•
Turn on the light and the speaker
•
First, turn on the AC power switch (
⑬
). Second, press the light power button (
⑤
),
and the light will then turn on.
•
Press the speaker power button (
). The indicator light will then turn on. The lamp
will play a startup tone when it is turned on. You should see a blue indicator light (
⑥
)
blinking that signals the lamp is ready for pairing.
•
Placing the salt chunks
•
Turn off the power switch and unplug the lamp from the wall outlet. Carefully place
the salt chunks into the clear cylinder (
⑧
). The salt lamp speaker is ready for use
once the salt chunks reach the rim of the cylinder without falling out.