P. 2
EN
GL
IS
H
<<OPERATION MANUAL -- VD8 RETROGRADE SERIES>>
*
Do not set the date between 10:00PM and 1:00AM
Otherwise, the day may not change properly. If it is necessary to set the date during that time period, first
change the time to any time outside it, set the date and then reset the correct time.
*
The retrograde day of the week can be set more quickly by following procedures:
(1) Pull out the crown to 2 click position for Day adjustment
(2) Turn the crown clockwise until the Day advance by one increment
(3) Turn the crown counterclockwise until the center hands at or before 12:00 position
(4) Turn the crown clockwise again until the Day advance by one increment
(5) By repeatedly perform the Steps (3) & (4), the Day hand can be adjusted to the desired position more quickly
<TIME INDICATION>
<TIME SETTING>
1. Pull out the crown to
the second click when
the small second hand
is at the 12 O'clock
position.
It will stop on the spot
and advance the hour
and minute hands by
turning the crown.
Set the day by rotating
the hour and minute
hands clockwise.
(Check that 24-hour
hand is set correctly)
2. Push the crown back
in to the normal
position in signal.
Pull out the crown to
the first click
3. Set the date by
rotating the crown in
counter-clockwise
direction (Quick
change function)
4. Push the crown back
in to the normal
position.
VD84
24 hours
small-second
VD85
small-second
VD86
small-second
VD87
small-second
day
(Retrograde)
date
date
day
(Retrograde)
day
(Retrograde)
date
day
(Retrograde)
date
