Health and Safety
1.
The manager of the department or section where the attachment is to be used must be responsible for
ensuring the operators are fully conversant with the attachment, its operation and maintenance.
2.
Never lift an unstable pack of blocks.
3.
Ensure all packs are banded together.
4.
Never stand between or under the grab under any circumstances.
5.
Always use a restraint net when lifting overhead.
6.
Ensure that the grab is lifting on the centre of gravity of its intended load.
7.
Never grab beyond halfway up on a block on the bottom row of a pack.
8.
Keep hands and fingers clear of all moving parts so as to prevent trapping.
9.
Never shock load the grab when loaded as this may result in losing the load.
10.
Always ensure that the grab is fully closed between each operation so as to ensure that the release
mechanism correctly rotates.
11.
The load should be lifted and manoeuvred with a smooth unformed action, without jerkiness and sudden
changes in direction as this could temporary loose the effectiveness of gravity, which will decrease the
gripping force.
12.
Ensure that the gripping surface, where the rubber pads touch the pack, is free from ice, plastic, grease etc
to ensure maximum gripping force is achieved.
The Operator should ensure that the above product is used for the purpose that it has been
designed, tested and intended to do and no deviation to this occurs. If in doubt, consult
your fork truck dealer or approved attachment supplier.