7
OPERATING INSTRUCTIONS
Airflow direction control
Adjust the air flow direction properly otherwise, it might
cause discomfort or cause uneven room temperatures.
Adjust the horizontal louver using the remote controller.
Adjust the vertical louver manually.
Perform this function while the unit is in operation.
Keep pressing the AIR DIRECTION button on the
remote controller to move the louver to the desired
direction. The readjusting angle of the horizontal
louver is 6 for each press.
To set the vertical air flow(Up--Down) direction
Adjust the vertical louver manually using the lever on the
left or right side of the vertical louver arm (Depending on
model). Take care not to catch fingers on the fan, horizontal
louver or to damage vertical louvers. When the air
conditioner is in operational and the horizontal louver is in
a specific position, move the lever at left (or right, depending
on model) end of the air outlet to the desired position.
Perform this function while the air conditioner is in operation.
Keep pressing the AIR DIRECTION button without releasing
for more than 2 seconds or press the SWING button on the
remote controller, the horizontal louver will swing up and
down automatically.
To stop the function, press the SWING button again.
To set the horizontal air flow direction (left - right)
To automatically swing the air flow direction (up - down)
The SWING and AIR DIRECITON button will be disabled when the air
conditioner is not in operation(including when the TIMER
is set).
Do not operate the air conditioner for long periods
the air flow
direction set downward in cooling or dry mode. Otherwise,
may occur on the surface of the horizontal
louver causing moisture to drop on to the floor or on furnishings.
Do not move the horizontal louver manually. Always use the SWING
or AIR DIRECTION button. If you move this louver manually, it may
malfunction during operation. If the louver malfunctions, stop the air
conditioner once and restart it.
When the air conditioner is started immediately after it was stopped,
the horizontal louver might not move for approximately 10 seconds.
Open angle of the horizontal louver should not be set too small, as
COOLING or HEATING performance may be impaired due to too
restricted air flow area.
Do not operate unit with horizontal louver in closed position.
When the air conditioner is connected to power (initial power), the
horizontal louver may generate a sound for 10 seconds, this is a
normal operation.
ON
with
condensation
CAUTION
!
Lever
Range
Range
(C)
｡
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
TIMER ON
SLEEP
ON/OFF
TIMER OFF
AIR
DIRECTION
RESET LOCK
SET TEMPERATURE
SWING
LED
DISPLAY TURBO
Summary of Contents for MSR3-12
Page 32: ...CS421 U...
