Inverto IDLV-4100PM-CT, User Manual

Page: 15 / 22

En
15
5.3 MeNu oPeraTIoN
The front panel LCD display will show bootup information after power is switched on. When booting ic completed,
the first line will display the product model and the second line will display the IP address of the device. Press
the ENTER button to enter the main menu:
Main Menu
Inputs Outputs System
(1) Input Setup Set input parameters
(2) Output Setup Set output parameters
(3) System Set system parameters
5.4 INPuTS MeNu
There are three options: Status, DVB-S2 and Ethernet (if IP port is configured as Input):
Inputs
Status DVB-S2
Ethernet
5.4.1 Status Menu
It contains two options, ASI and TUNER, to show the status of signal input:
ASI: When signal from ASI input port is locked, it will display package format and code rate; if signal is not
locked, it will show Unlock.
TUNER:
When signal from tuner input port is locked, it will display package format and code rate; if signal is not
locked, it will show Unlock.
If Extend Board Type is set as “IP IN” in Optional Function of System menu, there will be one more option
appeared: IP IN
IP IN: When signal from IP input port is locked, it will display package format and code rate; if signal is not
locked, it will show Unlock.
5.4.2 DVB-S2 Menu
There are 9 options to set DVB-S2 parameters. After signal is locked, the TUNER LOCK indicator on front panel
will turn green.
LNB Frequency: Input LNB frequency
Satellite Frequency: Input downstream frequency of satellite
Symbol Rate: Input symbol rate of satellite
LNB Voltage: LNB power voltage. OFF/18V/13V selectable
LNB 22KHz: 0 or 22K switch. Can select OFF/ON
Demodulator Mode: Can select DVB-S/DVB-S2
Operation Mode: Can select QPSK 1/2,2/3,3/4,3/5,4/5,5/6,8/9,9/10
8PSK 2/3,3/4,3/5,5/6,8/9,9/10
Pilot: Can select ON/OFF
Roll-Off Factor: Can select 0.2/0.25/0.35