This manual introduce the relevant operation of MPPT solar charger controller
1.1 Availability
This manual is used for all of TY-series MPPT charger controller
1.2 Target groups
This manual is appropriate for installer and operator
1.3 Before installing and using this controller, please read the safety information
carefully in this manual. And hold for safekeeping, in order to use it next time
1.4 Safety sign descriptions
The following are the descriptions of sign's type in this manual
Warning!
“Warning " means that if continue use, it might result in the machine fault or accident.
Danger!
“Danger" means that if continue use, it might result in the machine and accident.
Note!
Please read this operate instruction carefully, in order to manipulate this MPPT controller
more efficiently.
Warning!
• The range of input voltage of this controller is large, if you do not carefully operate, it
might cause personal injury
• All operation in this MPPT system should be conducted by technical personnel.
• These people do not allow to operate this system: Children, Disabled, Handicapped
or the operator who lack of relevant experience and knowledge.
• Keep away from children
Warning!
Over heat shell
• Please install in a well ventilated environment
Warning!
Radiation can damage health
• Do not stay for a long time at a distance of less than 200 centimeters near the solar
charge controller
Risk of electric shock
When the system is disconnection, the energy stored in the capacitor will still exist until 5
minutes, within this 5 minutes, please do no touch the internal components.
Do not self-repair the parts inside the machine, do not try to remove the cover; The
operation and maintenance of the product should be conducted by professional
personnel; Please use the insulation tool when you operate or repair it, in order to
reduce the risk of harm.
Note sign for over heat
The solar charging controller becomes heat during the operation. Please avoid to
touch it during running; Prohibit putting anything on the product or blocking the fan
vents.
Warning!
Make confirmation for the input direct current is less than or equal to the maximum
voltage rate, over voltage may cause the permanent damage to the solar controller.
Above situation not included in the warranty period. This section includes the instructions
of safety and operation. Read and save it for use next time.
Warning!
If the technician want to maintain or clean the solar controller or connect to the circuit,
it must be follow the relevant steps.
• Before using the solar charge controller, please read all instructions, warning signs and
the corresponding sections of this manual
• Please use the parts are recommended or sold by our company;
• In order to avoid the risk of fire and electric shock, please make ensure that the existing lines have
good conditions and suitable wire size. Do not operate under the damage of solar controller and
unqualified wire;
• Do not disassemble or attempt to repair the solar charge controller by yourself, it may result in
further damage and the risk or accident, also will loss the warranty;
• Keep away from flammable and explosive materials, to avoid caused the fire;
• The installation location should be kept away from moisture or corrosive substances;
• In order to reduce the probability of short circuit, the technician must be used the insulation tool
to operate the equipment.