Using Invertek Windows PC software:
Download the appropriate PC software from the Invertek Website.
(PC must have a Bluetooth port in order to use Bluetooth communication)
Insert the Optistick into the drive.
Pair the Bluetooth device. Default pairing code is “0000” and default device name is “Optistick”.
Setup an outgoing port on the PC with the Optistick Bluetooth device. This port will be used by PC software.
Using Invertek Windows PC software:
Download the appropriate PC software from the Invertek Website.
(PC must have a Bluetooth port in order to use Bluetooth communication)
Insert the Optistick into the drive.
Pair the Bluetooth device. Default pairing code is “0000” and default device name is “Optistick”.
Setup an outgoing port on the PC with the Optistick Bluetooth device. This port will be used by PC software.
Status LED
Green
:
Constant on: Power ok and found drive
Fast Flash:
Parameter Read/Write in progress
Slow Flash: Optistick in a drive network
Slow blink: No drive has been found
Blue
:
Constant on: Bluetooth ready
Flashing:
Bluetooth communications on
Bluetooth communications
Capability provides remote
control convenience for
programming with Invertek
software and a PC
Optistick Interface
Connects to RJ45 slot on
Optidrive (see Optidrive
product manual for further
information).
Parameter Read Button
Copy Parameters from
Drive to Optistick
Parameter Write Button
Copy Parameters from
Optistick to Drive
Locking Switch
Locks Optistick
parameter set so it
cannot be over-written
(Copy Parameter
function disabled).
1
2
3
4
5
6
Status LED
Green
:
Constant on: Power ok and found drive
Fast Flash:
Parameter Read/Write in progress
Slow Flash: Optistick in a drive network
Slow blink: No drive has been found
Blue
:
Constant on: Bluetooth ready
Flashing:
Bluetooth communications on
Bluetooth communications
Capability provides remote
control convenience for
programming with Invertek
software and a PC
Optistick Interface
Connects to RJ45 slot on
Optidrive (see Optidrive
product manual for further
information).
Parameter Read Button
Copy Parameters from
Drive to Optistick
Parameter Write Button
Copy Parameters from
Optistick to Drive
Locking Switch
Locks Optistick
parameter set so it
cannot be over-written
(Copy Parameter
function disabled).
1
2
3
4
5
6
