10.4
Step by step multiple tags
1. Wait for '1' in IsNewTag register.
2. Now do any operations (write, read, .....)
3. After all operation set 'HaltTag' to halt current tag and operate another
OR
4. Set WakeAll to reset all tags and operate again
11 Description of terminals
The view of the PCB is shown in the figure below.
Name
Description
Power
Power connector 12-24VDC
OUT 1
Relay output 1
OUT 2
Relay output 2
IN 1
Input 1
IN 2
Input 2
USB
USB port – module configuration
RS485
Connector RS485 MODBUS
Boot
Shortening the BOOT pins when power is applied causes the module
to enter the bootloader mode
User manual RFID IND Modbus Mif
Page
22
z
22
[B03]
