9. Turn the main filter clockwise to fasten it.
Caution:
Make sure that the filters are placed correctly. Incorrect placement of the filters affects the maximum
performance of the appliance.
CLEANING THE SPRAY ARMS
1. Remove the upper and lower basket.
2. Remove the nut (A).
3. Remove the upper spray arm (B).
4. Pull the lower spray arm (C) upwards to remove it.
5. Clean the spray arms. Use warm water.
6. Install the lower spray arm (C).
7. Install the upper spray arm (B).
8. Tighten the nut (A).
DRAINING THE PUMP
Food residue or foreign objects that were not captured by the filters can cause the waste water pump to block. The
rinsing water level will be above the filter. Drain the pump to remove the blockage.
Warning:
Broken glass or sharp objects can cause injuries.
1. Make sure that the appliance is disconnected.
2. Remove the lower basket.
3. Remove the filters. Refer to setion
'Cleaning the filters'
.
4. Remove the excess water. Use a sponge or cloth.
5. Remove the blockage.
6. Install the filters.
8
Extra information
WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
Level
German hardness
[dH]
French hardness
[dF]
British hardness [dE] Display indicator
1
0-5
0-9
0-6
L1
2
6-11
10-20
7-14
L2
3
12-17
21-30
15-21
L3
4
18-22
31-40
22-28
L4
5
23-31
41-55
29-39
L5
6
32-50
56-90
40-63
L6
RINSE AID CONSUMPTION SETTINGS
Level
Number of rinse aid doses that is dispensed
Display indicator
1
Rinse aid not dispensed
r1
2
1 dose
r2
(Figure 25)
(Figure 26)
(Figure 27)
50
•
English
