20
•
English
OUTER DIMENSIONS
In the drawing below, all the dimensions are displayed in mm.
Sufficient clearance around the hob is essential for a safe use of the hob. Check that there is sufficient clearance. The minimum
distance of the hob to a cooker hood should be at least 650 mm.
installation instructions
7
• The safety during use can only be guaranteed when the hob is installed correctly and according to the regulations. The installer is
responsible for any damage caused by a faulty installation.
• The appliance falls under protection class I and can only be used in combination with a grounding conductor connection. The
manufacturer accepts no responsibility for any malfunction or damage caused by incorrect electrical installations.
• The appliance must be connected to a fixed installation and the means of disconnecting it from the fixed installation must be
installed according to the installation instructions.
• The connection cable must hang freely. Do not tie the power cable or pass it along sharp edges. If there is an oven installed below,
pass the cable along the rear corners of the oven to the connection box. It must be positioned so that it does not touch any of the
hot parts of the hob or the oven.
• The connection point, the wall socket and/or plug must always be accessible.
• The worktop on which the hob is placed should be flat. Follow the instructions of the manufacturer of the worktop.
• Damage caused by incorrect connection, incorrect use or incorrect fitting is not covered by the guarantee.
• Attention:
any change to the appliance’s interior and changing the power cable, must only be performed by a qualified electricien.
