
AUTOMATIC OPERATION
Use this function if the oven is to be switched on for a specified period of time and
switched off at a fixed hour.
Set the preparation time and the end time.
Example: the current time is 15:30. The cooking time is 2 hours and 15 minutes. The
dish has to be done by 20.30. The oven starts cooking (20:30 minus 2 hours and 15
minutes) on the preset temperature and oven function and will finish at 20:30.
• Press the
[ OK ]
key until the display shows
auto
dur
.
• Set the required preparation time using the keys
[ < ]
or
[ > ]
. The preparation time
can be set from 1 minute to 10 hours.
• Press the
[ OK ]
key again. The display shows
auto
end
.
• Set the switch off time (preparation end time) using the keys
[ < ]
or
[ > ]
. The end
time is limited to a period of 23 hours and 59 minutes.
• Set the oven function knob and the temperature knob to the setting at which you
want the oven to operate.
• The set time will be saved in the memory after a few seconds. The display shows
auto
to indicate the function automatic switch on and off is activated and the
current time is shown.
• When the set time has passed the oven is switched off automatically, the alarm
signal is activated and the signal function
auto
is flashing.
• Press any key to turn the alarm signal off. The signal function
auto
disappears and the
current time is shown - e.g. 15.30.
• Turn the knobs for the oven function and the temperature to the
off setting [
0 /
].
CANCEL SETTINGS
The timer and the automatic function settings may be cancelled at any time.
• Press the keys
[ < ]
and
[ > ]
simultaneously to cancel the automatic function settings.
• Press the
[ OK ]
key to select the timer settings and then press the keys
[ < ]
and
[ > ]
simultaneously to cancel the timer.
CHANGE THE TONE OF THE ALARM SIGNAL
The tone of the alarm signal may be changed as follows:
• Press the keys
[ < ]
and
[ > ]
simultaneously.
• Select with the
[ OK ]
key the function
ton
.
The display will flash.
• Select with the key
[ < ]
the tone you want from the three options - ton 1, ton 2 or
ton 3.
English
•
39