inventum IVW6008AXL, User Manual

Page: 42 / 96

ADJUSTING THE HEIGHT OF THE UPPER BASKET
The complete upper basket can be moved to create more space in the upper basket or in the lower basket. When the
upper basket is in the upper position, you can place large items, such as pots and large plates, in the lower basket.
When the upper basket is in the lower position, you can place large plates in the upper basket.
1. Open the latch (A) on both guiding rails.
2. Remove the basket from the guiding rails.
3. Put the runners in the guiding rails:
a. Put the upper runners (B) in the guiding rails to put the basket in the lower position.
b. Put the lower runners (C) in the guiding rails to put the basket in the upper position.
4. Push the basket back in the guiding rails.
5. Close the latch on both guiding rails.
STARTING THE APPLIANCE
1. Push the on/off button to start the appliance.
CHOOSING A PROGRAM
Note:
For an overview of the programs, refer to section 'Programs' .
1. Use the program selector button to choose a program. The display shows the selected program and the duration.
2. Use the timer button to delay the start time of the program. Refer to section
'Delaying the program'
.
3. Use the half-load button to add the half-load option to the selected program.
Note:
If the half-load option is not compatible with the selected program, a buzzer sounds.
4. If necessary, cancel the half-load option by pushing the half-load button again until the corresponding indicator
goes off.
The program starts when you close the door.
CHANGING THE PROGRAM
You can change the program while the appliance is running.
1. Carefully open the door to avoid water spillage.
2. Use the program selector button to choose another program.
3. Close the door.
The newly selected program will resume the course of the previously selected program.
DELAYING THE PROGRAM
Note:
The start time of a program can be delayed for a maximum of 19 hours.
1. Push the timer button to delay the start time of a program. Every time you push the button the timer increases by
1 hour.
2. Push the timer button again to change the time or cancel the timer.
3. Close the door to activate the timer.
The program will start when the timer has finished.
(Figure 15)
(Figure 16)
42 • English