inventum IVW6006A, User Manual

Page: 44 / 92

Problem Possible cause Possible solution
The appliance makes unusual
sounds during a program.
The appliance is not loaded
correctly.
Make sure that you load the
appliance correctly. Refer to section
'Loading the appliance' .
One of the spray arms hits the
dishes.
Make sure that you load the
appliance correctly. Refer to section
'Loading the appliance'
.
There is food waste left on the
dishes.
The appliance is not loaded correctly
and the spray arms cannot reach all
the dishes.
Make sure that you load the
appliance correctly. Refer to section
'Loading the appliance' .
The cutlery basket is too full. Make sure that you load the
appliance correctly. Refer to section
'Loading the appliance'
.
The dishes are placed too close
together.
Make sure that you load the
appliance correctly. Refer to section
'Loading the appliance' .
The amount of detergent is
insufficient.
Make sure that you fill the detergent
reservoir with a sufficient amount of
detergent. Refer to section
'Filling
the detergent reservoir'
.
The selected program is not suitable
for the loaded dishes.
Choose a suitable program. Refer to
section
'Programs'
.
One of the spray arms is clogged. Clean the spray arms. Refer to
section 'Cleaning the spray arms' .
The filters are clogged. Clean the filters. Refer to section
'Cleaning the filters' .
The filters are not placed correctly. Make sure that you correctly place
the filters.
The water drain pump is clogged. Make sure that the water drain pump
is not clogged.
There are white stains on the dishes. The amount of detergent is
insufficient.
Make sure that you fill the detergent
reservoir with a sufficient amount of
detergent. Refer to section
'Filling
the detergent reservoir' .
The level of rinse aid consumption is
set too low.
Adjust the level of rinse aid
consumption. Refer to section
'Setting the level of rinse aid
consumption'
.
There is a high level of water
hardness and no salt is used.
Fill the salt reservoir. Refer to
section
'Filling the salt reservoir'
.
The level of water hardness is set
too low, which affects the salt
consumption.
Adjust the level of salt consumption.
Refer to section
'Setting the level of
salt consumption' .
The cap of the salt reservoir is not
closed correctly.
Make sure that the cap of the salt
reservoir is closed firmly.
The dishes are not dry. The selected program does not
include drying.
Choose a program that includes
drying. Refer to section
'Programs'
.
The level of rinse aid consumption is
set too low.
Adjust the level of rinse aid
consumption. Refer to section
'Setting the level of rinse aid
consumption' .
44 • English