inventum IOM6272BK, User Manual

Page: 39 / 88

1. Clean the inside of the appliance after every use. Use a damp cloth.
2. In case of heavy dirt, clean the inside of the appliance with warm water and a mild cleaning agent. Thoroughly
rinse and dry the inside after cleaning.
Note:
Leave the door open slightly to make sure that the appliance dries completely.
3. Clean the accessories. Use warm water and a mild cleaning agent. Dry the accessories after cleaning.
4. Clean the outside of the appliance. Use a damp cloth or sponge.
5. In case of heavy dirt, clean the outside of the appliance with a mild detergent.
Note:
The cover of the door can become discolored or the glass inside the door can be dirty. You can
remove the cover for thorough cleaning. Refer to section
'Removing the cover of the door'
.
6. If necessary, clean the cover of the door and the glass inside the door. Use warm water and a mild cleaning
agent. Dry the cover after cleaning.
REMOVING THE GUIDE RACKS
1. Pull the guide rack (A) from the opening at the front of the appliance.
2. Pull the guide rack from the opening at the rear of the appliance.
3. Remove the guide racks.
4. After cleaning, install the guide racks again. Refer to section 'Installing the guide racks' .
REMOVING THE TELESCOPIC RAILS
1. Push the front of the telescopic rail (A) up.
2. Remove the telescopic rail from the guide rack (B).
3. After cleaning, install the telescopic rails again. Refer to section
'Installing the telescopic rails'
.
REMOVING THE DOOR
Warning:
Risk of injury. Keep your hands away from the hinges.
1. Open the door (A) of the appliance.
Caution:
Do not use a sharp object to open the levers. This can cause damage to the appliance.
2. Open the levers (B) on each side of the door.
3. Close the door halfway.
4. Remove the door. Use both hands.
5. After cleaning, install the door again. Refer to section
'Installing the door'
.
INSTALLING THE DOOR
Warning:
Risk of injury. Keep your hands away from the hinges.
(Figure 11)
(Figure 12)
(Figure 13)
English • 39