operating the hob
5
Only use pans that are suitable for an induction hob.
After connecting the induction hob to the electrical system, it is possible that the entire display lights up for a short moment.
When this is over, the induction hob is standby and ready for use.
The induction hob works by means of electronic sensors that are operated by touching the corresponding touch controls
or sliders. At each touch of a touch control, you can hear a sound signal. Control the power by gently moving your finger
over the slider.
SWITCHING ON THE INDUCTION HOB
Switch on the induction hob by pressing the ON/OFF key for a few seconds. The displays of all cooking zones show
_
.
If no cooking zone is selected within 60 seconds, the induction hob switches off automatically.
SWITCHING OFF THE INDUCTION HOB
Switch off the induction hob at any time by pressing the ON/OFF key for a few seconds.
The ON/OFF key always has priority in the switching off function.
SWITCHING ON A COOKING ZONE
Place a pan on the cooking zone. Press the key of the cooking zone you wish to use. Select the required power using the
slider control
. Control the power by gently moving your finger over the slider. Slide to the right to increase the power
and to the left to decrease the power and/or switch the cooking zone off.
To bring food to the boil quickly, touch the
B
at the end of the slider control to activate the Boost mode.
BOOST MODE - B
The Boost mode provides extra power and can be set for all zones, except when the bridge mode is being used.
Slide the slider control of the selected cooking zone to the highest power or directly press the
B
at the end of the slider
control. The Boost mode is activated when a
b
appears on the display of the cooking zone concerned.
When an additional cooking zone is activated, the maximum available power is exceeded and the Boost mode is stopped
automatically.
It is possible that the maximum available power for the active cooking zones together is exceeded. In that case, the power
of the cooking zones is reduced automatically. The required power reduction is shown through flashing of the cooking zone
concerned. The display flashes for 5 seconds and during that time adjustments can be made before the power is reduced
automatically.
The time period of the Boost mode is 5 minutes maximum. After 5 minutes the power returns to the previously set position
or, if no position was selected, the Boost mode returns to position
9
.
SWITCHING OFF A COOKING ZONE
Select the cooking zone you want to switch off by pressing the corresponding key or by turning off the accompanying slider
control [
0
].
Move a finger to the left on the slider control or directly press the outer left side of the slider control to switch off
the cooking zone.
If the cooking zone is hot, the display shows a [
H
] instead of an [
0
].
SWITCHING OFF ALL COOKING ZONES AT THE SAME TIME
To switch off all cooking zones at the same time, you must press the ON/OFF key. On the displays of all cooking zones
that are still hot, you can see an [
H
].
RESIDUAL HEAT INDICATOR
The residual heat indicator shows that the glass is still too hot to touch in the area of the cooking zone.
If the area of the cooking zone is still too hot, a [
H
] appears on the display of the cooking zone concerned.
Once the temperature has dropped, the [
H
] indication disappears.
BRIDGE MODE - FLEXIBLE COOKING ZONE
By connecting two cooking zones, an extra large cooking surface is created, making it easy to bake in a large roasting pan
or on a grill plate. Only the two left cooking zones can be connected.
Switching on the connected cooking zones.
• Press the touch control to connect the two left cooking zones. Both accompanying slider controls switch on, but only
the top one can be operated.
• Select the required power with the top slider control
. Control the power by gently moving your finger over
the slider control.
• The connected cooking zone is ready for use.
English
•
27
Summary of Contents for IKI9035
Page 2: ...2 ...
Page 71: ... 71 ...
