4.1 On/off button
You switch the water heater on or off by press-
ing the on/off button for at least 2 seconds.
When the water heater is switched on, all LEDs
will light up briefly. When the water heater
is switched off, it will keep using a minimum
amount of electricity (less than 1W).
4.2 IntelliProtect control button
®
The HotSpot Titanium boiling water tap is
equipped with the IntelliProtect
®
safety system.
This system ensures that you are aware of how
you use the HotSpot Titanium.
The IntelliProtect
®
system allows you to set
three different safety levels:
Safety level 1:
As soon as the electronic control button is
pressed, the light at the base of the tap will
illuminate to indicate this. After 0.5 seconds
the valve will open and boiling water will flow
from the tap.
This setting provides optimal convenience
thanks to the quick and easy operation. The
waiting time prevents unintended use. Rec-
ommended in a closed environment without
children where the HotSpot Titanium is used
by experienced persons. The flow of boiling
water stops as soon as the button is released.
Safety level 2:
The system dispenses boiling water when the
electronic control button is pressed twice in
succession:
1 x short, immediately followed by keeping
the button pressed down. The flow of boiling
water stops as soon as the button is released.
This is the default setting, a good compromise
between safety and user-friendliness.
Pan-filling function
The pan-filling function is convenient when
you regularly require larger amounts of boil-
ing water. You do not need to keep the button
pressed down.
At this level, the HotSpot Titanium will keep
dispensing boiling water when the tap button is
kept pressed for longer than 10 seconds. Even
when the electronic control button is released.
As soon as the control button is pressed again,
the water flow will stop immediately.
F
How to use the pan-filling function:
You can select the safety level and pan-filling function by repeatedly pressing the IntelliProtect
®
button .
Level1/ Level2/ Level3/ Level1/ Level2/ Level3/
pot off pot off pot off pot on pot on pot on
F
F
F
F
F
Fig. 4.2 Control buttons on the pan-filling function
Please note: the factory default setting for
IntelliProtect
®
is level 2. The pan-filling
function is switched off.
Safety level 3:
Almost identical to safety level 2, but the
system dispenses boiling water after you have
pressed the electronic control button 3 times
in succession: 2x short, immediately followed
by keeping the button pressed down.
This IntelliProtect
®
level offers maximum safe-
ty. Recommended if there are small children
about, in (semi) public spaces, etc. The flow
of boiling water stops as soon as the button
is released.
If you press the control button
within 2 seconds after releasing
it, water will immediately start
flowing again. This way, you can
add a small amount of water if the
required level has not been obtained.
After stopping the pan-filling
function, it is possible to immedi-
ately dispense water again within
2 seconds. This way, you can add
a small amount of water if the
required
level has not yet been obtained. The pan-
filling function is restarted after 10 seconds.
10
