The hot air fryer can be used to prepare a wide range of dishes.
1. Check that the voltage corresponds with what is stated on the information plate and insert the plug in an earthed socket.
The full display briefly lights up and the hot air fryer is in the standby position. The standby key lights up red.
2. Carefully remove the pan from the hot air fryer by its handle.
3. Place the ingredients in the basket. Caution:
never exceed the recommended amount and never fill the basket above
the maximum, as the food could make contact with the heating element in that case.
4. Properly slide the pan back in the hot air fryer.
Never use the pan without the basket. If the pan is not properly placed
in the hot air fryer, the appliance will not function.
Caution: do not touch the pan during and shortly after use, as it gets very hot. Only hold the pan by its handle.
5. Press the standby key to switch on the hot air fryer. The display shows the preset of 190°C and 3 minutes.
6. Select an automatic menu with the
key and set the time ( 1 - 60 minutes ) and temperature ( 80 - 200°C ) yourself.
Tip:
add 3 minutes to the cooking time when the hot air fryer is cold or use the automatic menu Preheating.
7. To switch on the hot air fryer, you then press the ON key
.
• The display alternates between the set time and set temperature.
• The display shows the remaining time. Time and temperature can be adjusted during frying by pressing the or key.
During hot air frying, the fan symbol
changes colour. Green means that the fryer has reached the required temperature.
• When the fan symbol
is red, the hot air fryer is heating up.
• Excess oil dripping from the ingredients is collected in the pan.
8. Some ingredients must be shaken halfway the cooking time. Take the pan from the hot air fryer by its handle and place
it on a heat-resistant surface, such as a pan coaster. Press the release button of the handle and lift the basket from the pan.
Shake the contents of the basket above the pan to prevent leaking and click back the basket in the pan.
Then slide back the pan in the hot air fryer to continue frying. Then press the ON key
to continue the frying process.
9. As soon as the set time has elapsed, the hot air fryer will automatically switch to the standby position: The fan does continue
to run in order to allow the hot air fryer to cool down. After approximately 20 seconds, 5 beeps will sound and the fan symbol
is switched off. Pull the pan from the hot air fryer by its handle and place it on a heat-resistant surface, such as a pan coaster.
Check that the ingredients are cooked.
hot air frying
4
AUTOMATIC MENUS
Press the menu key
to select the following modes:
Menu
Set
temperature in °C
Set time
in minutes
Preheating
200
3
French fries
200
22
Shrimps
160
8
Meat
200
25
Poultry
180
20
Fish
200
10
Steak
200
12
Cheese gratin
170
3
Bacon
200
10
The temperatures and times in the table are indications. Depending on size and weight, it may be necessary to adjust temperature and time.
It is possible to adjust the set temperature and time of the automatic menus. This is not possible when using the Preheating programme .
18
•
English
Summary of Contents for GF350HLDB
Page 2: ...2 ...
