inventum AKD6005ZWA, User Manual

Page: 34 / 72

6. The lamp holder will spring back in position by itself. If this doesn't happen, carefully bend the holder back in
position.
7. Install the grease filter.
8. Repeat the steps for the second lamp.
7 Troubleshooting
GENERAL TROUBLESHOOTING PROCEDURE
1. Try to find a solution for the problem with the help of the troubleshooting table.
2. If you cannot find a solution for the problem, contact the Inventum-servicedienst.
TROUBLESHOOTING TABLE
Problem Possible cause Possible solution
The motor does not operate.
The mains plug is not connected. Connect the mains plug.
There is no mains supply.
• Do a check if the mains plug is
correctly connected to the mains
socket.
• Make sure that the mains supply
is on.
There is a problem with the fuse. Do a check on the fuse box.
The appliance does not operate
correctly or makes an unusual
sound.
The dimension of the outlet is not
correct.
Make sure that you use the correct
dimension during installation. Refer
to chapter
'Installation'
.
The outlet has a blockage. Remove the blockage.
The grease filter is dirty. Clean the grease filter. Refer to
section 'Cleaning the grease filter' .
The carbon filter is worn. Replace the carbon filter. Refer to
section 'Replacing the carbon filter
(optional)'
.
8 Technical data
TECHNICAL SPECIFICATIONS OF THE COOKER HOOD
Item Specification
Energy efficiency class B
Air flow rate (at min/max speed) [m3/h] 260/430
Air flow rate (at high speed/turbo mode) [m3/h] 665
Lighting efficiency class A
Grease filtering efficiency class E
Power consumption in standby mode (Ps) [W] 0.45
Noise level at min/max speed [dB] 51/62
Noise level at min/max speed (at high speed/turbo
mode) [dB]
68
Color Black
Number of motors 1
34 • English