INVENTOR V5MDI32-36WiFiRB/U5MRS32-36, User & Installation Manual

Page: 7 / 116

7
2. INSTALLATION ACCESSORY
2. Prepare the following assemblies on the site.
No Name
Qty.
(embeded
into wall)
Specification
(only for
reference)
Remarks
1 Switch box 1 - -
2 Wiring Tube (lnsulating Sleeve
and Tightening Screw)
1 -
-
Precaution of install the wire controller
1. This manual provides the installation method of wire
controller. Please refer to the wiring diagram of this instal-
lation manual to wire the wire controller with indoor unit.
2. The wire controller working in low voltage loop circuit.
Forbid to directly contact the cable of 220Vcommercial
electricity or of 380V high voltage, and don’t wire this kind
of wire in the said loop; wiring clearance between config-
ured tubes should at the range of 300-500 or above.
3. The Shielded wire of the wire controller must be
grounded reliable.
4. Upon finish the wire controller connection, do not em-
ployed tramegger to detect the insulation.
5. The connective cable of wire controller should not be
longer than 20 meters.