INVENTOR PFI2VI-09WFI, User Manual

Page: 6 / 48

6
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
ON/OFF
SET
Turns the unit on or off.
MODE
TIMER
FRESH
CLEAN
LED
TURBO
Scrolls through operation modes
as follows:
AUTO

COOL

DRY

HEAT

FAN
SWING
Increases temperate in
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together &
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
TEMP
TEMP
Used to confirm the selected
functions
Decreases temperature
O O
in 1 C(1 F) increments.
Min. temperature is
O O
16 C(60 F).
Used to start/stop the air fresh
feature.
Set timer to turn unit on or off
Scrolls through operation
functions as follows:
Follow Me( ) AP mode
( )

Follow Me( )

The selected symbol will
flash on the display area,
press OK button to confirm.
Enables unit to reach preset
temperature in shortest
possible time
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
 
NOTE: Holding this button
down for 2 seconds will
activate Silence feature.

OK
SLEEP
Saves energy during sleeping
hours.
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature(some units).
NOTE: HEAT mode is not
supported by the cooling only
appliance.
Used to start/stop the Self
Clean or Active Clean function.
(Model dependent, please refer
to the USER’S OPERATION &
INSTALLATION MANUAL).
Model:
RG10B1(D2S)
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the
How to Use Basic Functions
section of this manual.
Buttons and Functions
 
 

