INVENTOR MOB-GPC12AF, Owner'S Manual

Page: 13 / 24

-
11
-
1.Press ON/OFF button to start the unit after powering
the main unit on.(Note: Power the unit on every time,
the big -guide louver and small-guide louver will be
closed firstly.
)
2.Press MODE button to select desired running mode.
3.Press +/ - button to set the desired temperature
.
(It is unable to set the temperature at AUTO mode)
4. Press FAN button to set fan speed, the AUTO FAN,
LOW, MID or HIGH could be selected.
5. Press button to set swing mode.
1.Press SLEEP button, set the sleep mode.
2.Press TIMER button, then press +/- button, to set the
3. Press LIGHT button to control displayer light on or off.
4. Press X-FAN button to set X-FAN function on or off.
5. Press TURBO button to set this function on or off.
Guide for operation-optional operation
Introduction for special function
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit
About X-FAN function
is stopped to avoid mould.
1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button
indoor fan will continue running for about 10 min. at low speed. In this period,
press X-FAN button to stop indoor fan directly.
2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button,
the complete unit will be off directly.
ON/OFF MODE
FAN
X-FAN
TURBO SLEEP LIGHT
TEMP TIMER
ON/OFF MODE
FAN
X-FAN
TURBO SLEEP LIGHT
TEMP TIMER
Guide for operation-general operation
scheduled timer on or timer off.
OPERATION OF THE REMOTE CONTROLLER