INVENTOR M3GHP290-12, User Manual

Page: 9 / 48

9
Function buttons(continued)
5 6
Remote Screen Indicators
Push this button to set and activate your favorite
pre-settings.
9 SHORT CUT Button:
11
I SENSE Button
Temperature sensing and room temperature
display button.
TIMER OFF Button
10
Press this button to activate the Auto-off time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until
the time setting is 0.0.
12
Press this button to clear the display on the
indoor unit, press it again to light the
display.
LED Display Button
Press together the two buttons
simultaneously (SHORT CUT & TIMER
OFF buttons) for 5 seconds to lock the
keyboard. Press together the two buttons
again for 2 seconds to unlock the keyboard.
Press together simultaneously
Model: RG51F/EF
SHORT CUT
I SENSE
1
3
5
7
9
11
2
4
6
8
10
12
Information are displayed when the remote controller is power up.
Note:
All indicators shown in the figure are for the
purpose of clear presentation. But during the
actaul operation, only the relative function signs
are shown on the display window.
Displayed when data transmitted.
Displayed when remote controller is ON.
Low speed
NO display
Medium speed(some units)
High speed
Auto fan speed
Displayed when TIMER ON time is set
Displayed when TIMER OFF time is set
Indicated all the current settings are
locked
Shows set temperature or room
temperature, or time under TIMER setting
HIGH
MED
LOW
AUTO
COOL
DRY
HEAT
AUTO
HEAT
COOL
FAN
DRY
Mode display
Fan speed indication
FAN
HIGH
MED
LOW
Displayed when I SENSE feature is
activated(some units)
Displayed when SLEEP feature is activated
(some units)