inventiv 202107, Safety And Operating Manual

Page: 22 / 36

SAFETY AND OPERATING MANUAL
22
202107 Belt sander 900W
WORKING HINTS FOR YOUR BELT SANDER
MAINTENANCE
ENVIRONMENTAL PROTECTION
If your power tool becomes too hot, especially when used at low speed, set the speed to
maximum and run with no load for 2-3 minutes to cool the motor. Avoid prolonged usage at very
low speed. Always use a sanding belt suited to the material you wish to sand. Always ensure the
work-piece is firmly held or clamped to prevent movement. Support large panels close to the
sanding area. Any movement of the material may affect the quality of the sanding finish. Start
your sander before sanding and turn off only after stopping sanding. For best results sand wood
in the direction of the grain. Do not start sanding without the sanding belt fitted. Empty the dust
bag every 5 minutes or sooner to ensure efficient dust collection.
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance. There are no user serviceable
parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust. Occasionally you may see sparks through
the ventilation slots. This is normal. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authorities or retailer for recycling advice.