inventiv 202104, Safety And Operating Manual

Page: 15 / 36

SAFETY AND OPERATING MANUAL
15
202104
You must read operating instructions before using the tool. Keep operating instructions
with the tool. Keep operating instructions with the hammer, so that they may be referred to,
if necessary.
Rated voltage 230-240V~50Hz
Rated power 260W
No load speed 6000-12000 /min
Protection class /II
Base size 90*187 mm
Orbital dia. 1.6 mm
Machine weight 1.69kg
A weighted sound pressure L
PA
: (K-3dB(A)) 74,3 dB(A)
A weighted sound power L
WA
: (K=3dB(A)) 85,3dB(A)
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission value: a
h
= 4,6 m/s2
Uncertainty K = 1,5 m/s²
Accessories in packing 3 sanding paper(40/80/120 grit)
1 Cyclone dust box
1 Vacuum adaptor
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission value during actual use of the power tool can differ from the declared
value depending on the ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING:
To be accurate, an estimation of exposure level in the actual conditions of use should also take account
of all parts of the operating cycle such as the times when the tool is switched off and when it is running
idle but not actually doing the job. This may significantly reduce the exposure level over the total working
period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
0 C or less
Plan your work schedule to spread any high vibration tool use across a number of days.
1. TECHNICAL DATA