User Manual
XC-RF855 Reader
7
Use the USB cable provided to connect the reader to the PC.
5.4 Power Supply
Please follow the following steps to connect the XC-RF855 reader power sup-
ply:
Confirm that the input voltage and frequency of AC power supply meet the
requirements:
AC input100-240V, 50-60Hz
；
Confirm that the output voltage of the power adapter is 5V/4A.
Insert the power cord into the AC power supply socket and insert the other
end into the power interface of the reader.
Once connected to power supply, the power indicator of the LED panel will
be on, and the reader enters the initialization state, and the system complets the
initialization process and enters the standby mode.
XC-RF855 reader enters standby mode by default after initialization. The
reader does not transmit any frequency when initializing and standby (RF ampli-
fier is turned off). RF amplifier only enters into operating condition after receiv-
ing command of “read or write tag” or “start amplifier” from the PC.
5.5 USB driver supported system
Windows10 32,64-bit
；
Windows8/8.1 32,64-bit
；
Windows7 32,64-bit
；
Win-
dows Vista and Vista 64-bit
；
Windows XP and XP 64-bit
；
Windows 98
，
98SE, ME, 2000, Server 2003, XP, Server 2008 and server 2012 R2,Windows
XP Embedded,Windows CE 4.2, 5.0 and 6.0
5.6 Acceptance
The acceptance criteria are mainly given from two aspects: structure and perfor-
mance.
5.6.1 Structural acceptance
Check whether the installation meets the installation standards and the assembly
in good condition.
5. Installation and Commissioning
