1-3
DCV-00617 S2 R01
Introduction
This guide covers how to install and configure a Secure Contactless Controller (SCC) in a G7-100 terminal. The SCC
is also known as a G7 Smart NFC Puck.
1.1 SCC Overview
The SCC is a standalone peripheral with the antenna and contactless reader combined into one entity.
It is designed to replace the existing NFC antenna component in a G7-100 terminal and is compatible with all
variations of the G7 family of products. It can be retro-fitted in the field and, once installed, has its own anti-removal
tamper protection.
To meet current security standards, the SCC supports EMV Contactless v3.0 and is PCI 5 compliant.
1.2 Before you begin
Before installing the SCC, ensure you have available the correct version of firmware that supports the SCC. Firmware
versions for vendev OPTs begin with R3.2.20. For example:
• R3.2.20_seq_conf_dev_02.05.0002.tgz
Also, make sure you read and understand the latest versions of the following documents:
• Quick Start Guide: G7-100 Vendor Development OPT (DCV-00513)
• User Guide: G7-100 and G6-300 Payment Contactless Interface (DCV-00280)
• User Guide: G7-100 and G6-300 Service App (DCV-00260)
• User Guide: TMSLite (SocketTAL) (DCV-00277)
©2021 Invenco Group Ltd. All rights reserved.
The information in this document is subject to change without notice and should not be construed as a
commitment by Invenco Group Ltd. Invenco Group Ltd has taken great effort to verify the accuracy of ©2021
Invenco Group Ltd. All rights reserved.
