A11
Interchangeable Quick Contact Battery Leads with Clamps
Connectors
Snap Connector
Interchangeable Quick Contact Battery Leads with Eyelet Terminals
Maintenance
INVATEC
SC-7 charger does not need any specific maintenance. Only install, maintain or service this charger
when it is disconnected from the mains. It may be cleaned with a dry cloth or soft tissue. Under any circumstances,
do not use any solvents or other cleaning agents.
Mounting & Product dimensions
The charger is easy to fix using two screws. Please refer to product drawing.
Equipment
INVATEC
SC-7 charger is supplied with two detachable and interchangeable colour coded lead sets- one with clamps for
bench charging and other with eyelet terminals (Ø6.3mm) with in-line battery protection plug-in fuse (10A) for permanent
attachment to the battery posts to allow quick connection/disconnection through snap-connector.
Declaration of Compliance
Tested and approved by and conforms to EN 60335-1, EN 60335-2-29, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3, EN 50366
Note: We reserve right to carry out technical modifications for improvement of SC-7 charger without notice.
Moto
rcycle
Golf Cart
Boa
t
Trac
tor
Car
A
TV
Sno
wmobile
T
ruck
R V
Application
67321
