www.discountscooters.co.uk
6
08000 96 12 96
TILLER CONTROLS
Speed control
The speed control allows you to set a speed between 1 (minimum) and 10
(maximum).
Battery Level Indicator
The number of LED bars lit shows the amount of charge left in your batteries. The
amount of charge will only show at its true level when the scooter is in drive.
Caution
—
Do not allow the LED bars to go out completely as the complete
discharge of the batteries could cause irreversible damage.
Key Switch
Insert the key in to the right side of the tiller control
(Fig.
6). Turn the key and the
LED bars will light up. There is a delay before the thumb lever control can be
operated, while the controller is checking the circuits.
Horn
Press the yellow horn button to sound the horn.
Thumb Lever Controls
Located at the rear of the tiller
(Fig. 6).
The left thumb lever controls the reverse and the
right thumb lever controls the forward motion. The amount of pressure applied to each
lever will determine the speed the scooter will travel at. Release the lever and the scooter
will slowly come to a stop and the magnetic brake will be applied.