54
7
Van Seat
WARNING
•
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching
hardware is tightened securely - otherwise injury or damage may result.
7.1
Replacing seat positioning strap
Standard/Adjustable Seat frames
1. Remove the seat cushion from the seat pan.
2. Move the flip back armrests out of the way. Refer to USING/ADJUSTING FLIP BACK ARM-
RESTS in PROCEDURE 5 of this manual.
3. Remove the two (2) mounting screws, quick release pin tabs, spacers, and locknuts that secure
the seat pan and seat positioning straps to the seat frame.
4. Remove the two (2) halves of the seat positioning strap from the rear seat frame.
NOTE:
Quick release pin tabs are positioned underneath the seat positioning strap.
5. Reposition the two (2) new seat positioning strap halves underneath seat rails.
6. Reinstall the two (2) mounting screws, quick release pin tabs, spacers, and locknuts that secure
the seat pan and seat positioning straps to the seat frame and torque to 75-inch pounds.
7. Reinstall the seat cushion onto the seat pan.
