5 USAGE
Invacare® Van Seat
24
Part No 1143195
Using the CMPJ+ Joystick
1.
Make sure the wheelchair is on a level surface.
2.
Select a drive that has the Actuator Control Switch Mode icon
displayed.
3.
Select the Actuator Control Switch Mode icon (Detail “A”).
4.
Four of the following icons will display when Actuator Control Switch Mode is selected:
5.
Select the desired operation using the joystick or an equivalent switch.
For this procedure, refer to FIGURE
2 on page 25.
The location of the icons indicates the joystick direction or quadrant (Detail “B”).
ICON
DESCRIPTION
Elevate Operations
Combined Power Leg Operations
Right Leg Operations
Left Leg Operations
No Icons
No powered seating operation has been programmed for this quadrant.
The three icons indicate up/down, up or down, respectively.