4.
Repeat this procedure for the opposite side.
5.
Adjust the brake the brake sensitivity, if necessary..
9.3 Replacing Brake Pads
Fig. 9-3
Use a 2 or 2.5 mm hex key for this procedure.
1.
Loosen set screw
A
until the brake pad
B
can slide out.
2.
Slide out the existing brake pad
3.
Install new brake pad.
4.
Tighten set screw.
5.
Repeat for remaining brake pad.
9.4 Adjusting Reach of Brake Lever
Brake Lever positioned
farther from brake handle
Fig. 9-4
Brake Lever positioned
closer brake handle
Fig. 9-5
Use a 1.5 mm hex key.
1.
Loosen or tighten the set screw
A
to re-position the
brake lever
B
closer or farther away from the brake
handle.
60001470-A
41
