1.
Position the battery with battery connector bracket
A
against
the back edge of the battery tray
B
in the orientation as shown.
Batteries MUST be installed in the orientation shown so
that the wiring harnesses can be connected together.
2.
Position the remaining battery between the battery on the tray
and battery stop
C
.
3.
Connect batteries together
D
.
4.
Connect battery straps
E
.
5.
Slide the battery tray into the wheelchair
6.
Install the rear shroud, front shroud and battery retention
bracket. Refer to 8.8.3 Removing/Installing the Front
Shroud/Battery Retention Bracket, page 62.
8.12
Replacing Batteries and/or Battery Cables
Have the following tools available: 7/16 inch (6pt) Box
Wrench and Diagonal Cutters.
1143190-N-03
67
