Invacare Spectra XTR Instruction Manual Download

Page: 53 / 152

8.3.2 Adjusting the backrest (fixed seat)

8.3.2.1 Electric

Please consult the instruction manual for your remote for information about electric adjustment.

8.3.2.2 Manual

The angle of the manually adjustable backrest is continuously adjustable b2° and +22°.

Pre-requisites:

•

1x Open-end spanner 13 mm

•

1x Phillips screwdriver

The angle of the manually adjustable backrest is adjusted
on both sides by means of a knurled adjustment screw (1)
and a limiting screw (2), which is fitted with a counter nut
(3).

•

Loosen the knurled screws (1) on both sides.

•

Loosen the counter nut (3) of the limiting screw (2),
using the open-end spanner 13 mm.

•

Adjust the limiting screws (2) evenly on both sides to the
desired backrest angle, using the Phillips screwdriver.

•

Tighten the counter nut (3).

•

Re-tighten the knurled screws.

Summary of Contents for Spectra XTR

























































































































































Search results

Summary of Contents for Spectra XTR

Reviews:

Related manuals for Spectra XTR

Brands by name

Popular brands

Invacare Spectra XTR, Instruction Manual

Search results

Summary of Contents for Spectra XTR

Reviews:

Related manuals for Spectra XTR

Brands by name

Popular brands