8
3
Notes on Transport
If the wheelchair has to be shipped back to the manufacturer for major repairs, you should always
use the original packaging for transport.
You should also include as accurate a fault description as possible.
4 Information
Symbols
WARNING!
This symbol warns you of danger!
•
Always follow the instructions to avoid injury to the user or damage to the product
!
NOTE
:
This symbol identifies general information which is intended to simplify working with your product
and which refers to special functions.
Requirements:
•
This symbol identifies a list of various tools, components and items which you will need in
order to carry out certain work. Please do not attempt to carry out the work if you do not have
the listed tools available.
5
Safety and Assembly Instructions
These safety instructions are intended to prevent accidents at work and it is imperative that they
are observed.
5.1
Before any inspection or repair work
Read and observe this repair manual and the associated operating manual.
Caution
•
Please note the heavy weight of some components. This applies especially to the removal of
drive units and batteries.
•
The wheelchair must be switched off before removal of voltage-carrying components.
•
To do this, disconnect the batteries or remove them.
•
When making measurements on voltage-carrying components, avoid short-circuiting the
contacts.
•
Danger of fire and combustion!
5.2
During dismantling / reassembly
Mark all current settings for the wheelchair (seat, armrests, backrest etc.), and the cable
connecting plugs associated, before any removals. This makes reassembly easier.
Caution
•
Prop up the wheelchair with appropriate supports before starting any assembly or
disassembly.
•
Never use standard nuts where self-locking nuts have been used.
NOTE
:
All plugs are fitted with mechanical latches which prevent release of the connecting plugs during
operation.
To release the connecting plugs the latches must be pressed in.
When reassembling, ensure that the latches are correctly engaged.
