Scorpius
Service Manual
1654773~A
43
Re-Installation Instructions:
❖
When re-installing the power socket, make sure it is
the right position, see the picture on the right. If the
connector position is incorrect, it will not be possible
to reinstall the battery pack.
2.11.4 SERVICE-11-4 Rear Fender Repair
SERVICE-11 Rear Top Shroud Repair
1. Disengage the locking pins on both sides of the rear fender and seat bar mechanism.
2. and
3. Remove the screws (12 mm, 4 pcs) on both sides of the rear fender.
4. Pull the rear fender back to separate it from the frame.
5. Take the rear fender off.
❖
For re-installation, follow the exact reverse sequence of these steps.
2.11.5 SERVICE-11-5 Folding/ Unfolding Board Repair
SERVICE-11 Rear Top Shroud Repair
1. Find the folding/ unfolding board inside the Scooter.
2. Remove the two screws holding the board.
3. Take the board out.
❖
For re-installation, follow the exact reverse sequence of these steps.
•
Step 4. When the N-D lever is in the D position, the rear fender may not be easy to remove.
Shift the gear to the N position to make removal easier.