Scorpius
Service Manual
1654773~A
19
2.2 SERVICE-02 Steering Bar Repair
Remove shrouds as shown in
SERVICE-03 Headlight Shroud Repair
SERVICE-10 Front Top Shroud Repair
SERVICE-11 Rear Top Shroud Repair
Then proceed as follows:
1. Remove the rear frame - left side hook (2 pcs) main cable.
2. Cut and remove the cable tie (2 pcs) of the front frame at the left side.
3. Cut and remove the cable tie (2 pcs) at the front end of the front frame.
4. Remove the two hexagon screws (#6/40 mm, 2 pcs) connected to the frame and the steering bar.
5. Push the steering bar upwards for removal.
6. Take out the steering bar.
❖
After the replacement of parts or re-installation, please follow the exact reverse sequence for reassembly.
•
After changing the battery type from lead-acid to lithium, or vice-versa, make sure that the
steering head charger socket and battery pack charger sockets match the type of battery
installed. See
•
Self-modification of charging cables or plugs and sockets is extremely dangerous and can
lead to short circuits and even fire.
