12
13
All information is subject to change without prior notice. Photographs are for illustration purposes only and may vary from product description.
Invacare
®
is a registered trademark and Yes, you can.™ is a trademark of Invacare
®
Corporation. 2008 Invacare Asia Pacific
RPS 440ee User's Manual
RPS 440ee User's Manual
All information is subject to change without prior notice. Photographs are for illustration purposes only and may vary from product description.
Invacare
®
is a registered trademark and Yes, you can.™ is a trademark of Invacare
®
Corporation. 2008 Invacare Asia Pacific
Mounting Battery Charger
NOTE: Refer to your local regulations concerning proper mounting procedures.
1.
Place the battery charger with mounting bracket on the wall at the desired position.
2.
With a pencil, mark the MIDDLE hole position.
3.
Measure down 6-1/2-inches from the pencil mark and drill one (1) mounting hole.
4.
Install the BOTTOM mounting screw until there is an approximate1/8inch gap between the
screw head and the wall.
5.
Install the battery charger with mounting bracket onto the bottom mounting screw.
6.
Drill the remaining two (2) mounting holes.
7.
Install the two (2) remaining mounting screws through the mounting bracket and into the
wall. Tighten securely.
8.
Plug the battery charger into the wall electrical outlet.
NOTE: ON LED should illuminate.
Summary of Contents for RPS 440ee
Page 2: ......
