Invacare rea Focus, User Manual

Page: 19 / 48

Components
5.
C
C
B
A
Push the adjustment screw
C
back into position after the
adjustment.
6. Re-tighten the screws A and B .
The screws should be tightened with a torque of 20 +/-
2 Nm.
5 mm allen key
4.15.2 Castor height
Observe that only the height (89,4 mm) version of the castor
attachment is adjustable in height.
1.
A
B
Loosen the screw
A
with approximately 7 turns.
2. Loosen screw
B
with approximately 2 turns.
3.
C
C
D
Pull out the castor housing
C
and adjust it to a desired height.
There are three possible fixed heights
D
.
4.
A
B
C
Push the castor housing
C
back into position after adjustment.
5. Re-tighten the screws
A
and
B
.
The screws should be tightened with a torque of 20 +/-
2 Nm.
5 mm allen key
4.16 Tires
The ideal pressure depends on the tire type:
The table below is an indication. In case the tire differs from the list
below, check the side of the tire, the maximum pressure is listed
there.
Tire Max. pressure
Pneumatic 24 x 1
3/8 x 1 1/4 4,5 bar 65 psi
Pneumatic 24 x 1
3/8 4,5 bar 65 psi
Pneumatic low
profile 7,5 bar 110 psi
Low profile PKT
(24x1)
— —
Pneumatic block
pattern puncture
proof
— —
Solid
— —
The compatibility of the tires listed above depends on the
configuration and/or model of your wheelchair.
In case of a tire puncture consult a suitable workshop (e.g.
bike repair shop, bicycle dealer ...) to have the tube replaced
by a skilled person.
4.17 Adjusting the brakes
WARNING!
Reduced brake effect
–
Incorrect adjustments of the brake can reduce the
effectiveness of the brake.
1431580-B 19