42
REPLACING BATTERY BOX
RETAINING STRAP (FIGURE 1)
1. Remove the battery boxes. Refer to INSTALLING/
REMOVING BATTERY BOXES in PROCEDURE 8
of this manual.
WARNING
The retaining strap MUST be fed through the ad-
justable end of the battery box retaining strap clip
as shown in FIGURE 1.
2. Feed the existing battery box retaining strap through
the adjustable end of the battery box retaining strap
buckle.
This Procedure includes the following:
Replacing Battery Box Retaining Strap
NOTE: Tray shown by itself for clarity. There is no
need to remove the tray from the wheelchair if the
retaining strap is being replaced.
FIGURE 1 - REPLACING BATTERY BOX RETAINING STRAP
Slot
Battery Box
Tray
Retaining Strap
Retaining Strap
Buckle
R
E
T
A
I
N
I
N
G
S
T
R
A
P
PROCEDURE 10
RETAINING STRAP
WARNING
After ANY adjustments, repair or service and BE-
FORE use, make sure all attaching hardware is
tightened securely - otherwise injury or damage
may result.
3. Feed the existing battery box retaining strap through
the slot in the battery box tray.
4. Feed the new battery box retaining strap through
the inside of the slot in the battery box tray.
5. Feed the new battery box retaining strap through
the adjustable end of the battery box retaining strap
buckle.
6. Reinstall the battery box. Refer to INSTALLING/RE-
MOVING BATTERY BOXES in PROCEDURE 8 of
this manual.
WARNING
The Battery Box Retaining Strap MUST be fastened
securely in place before using the wheelchair.
