Invacare® Pronto™ M41 Series
1.
Pull front and rear faces of backrest upholstery (1)
apart and remove. Backrest upholstery front and rear
faces are held together using hook-and-loop fastenings.
2.
Open backrest belt (2) with hook-and-loop fastenings
and adjust to required length.
3.
Attach upholstery and fix with hook-and-loop
fastenings.
Fig. 7-2
7.3 Replacing Backrest (Standard Seat)
•
5 mm Allen key
•
10 mm wrench
•
13 mm wrench
1.
Remove backrest cushion.
2.
Loosen and remove handwheels (3).
3.
Loosen bolts (4) including nuts and washers on the
left-hand and right-hand side.
4.
Remove backrest tube (1) from backrest holders (2).
If Backrest Holders also need to be replaced
5.
Loosen and remove Allen screws (5) including nuts and
washers on the left-hand and right-hand side.
6.
Install parts in reverse order.
7.
Test all functions.
Fig. 7-3
7.4 Replacing Armrest (Captain's Seat)
•
12 mm box wrench
•
13 mm box wrench
1.
If necessary, disconnect joystick.
2.
Loosen lever (1) that secures armrest (3) to armrest
support tube (2).
3.
Remove armrest from armrest support tube.
4.
If necessary, repeat first three steps to remove
remaining armrest.
5.
Install parts in reverse order.
6.
Test all functions.
Fig. 7-4
46
1568396-C
