Invacare® Pronto® Air Personal Transporter with MyBody Seating
12.2
Electrical
For additional troubleshooting information and explanation of error codes, refer to the individual Electronics Manual supplied with each
personal transporter.
12.2.1
Information Gauge Diagnostics
The joystick information gauge acts as a service indicator to give indications of the type of fault
or error detected by the control module. When a fault is detected, the personal transporter
may stop and not drive. The LED
A
on the information gauge will flash rapidly. The number
of flashes indicates the nature of the error. If multiple errors are found, only the first error
encountered by the control module will be displayed.
NUMBER OF
FLASHES
ERROR CODE DESCRIPTION
POSSIBLE SOLUTION
1
User Fault
Release joystick to neutral and try again.
2
Battery Fault
Charge the batteries.
3
Left Motor Fault
Contact Invacare/Dealer for service.
4
Right Motor Fault
Contact Invacare/Dealer for service.
5
Left Park Brake Fault
Ensure brake lever is in the drive position before turning on the personal
transporter. Ensure motor cable is plugged into the controller.
Contact Invacare/Dealer for service.
54
1580058-B
