SECTION 11—REGULATOR
45
FIGURE 11.1
Replacing/Adjusting Regulator
12. Torque mounting screws to .56 N-M ±.11 N-M (5 ± 1 in-lbs).
13. Re-install product tank and secure with the adjustable clamp.
14. Reinstall 1/8-inch tubing to the regulator assembly.
15. Adjust regulator pressure if necessary. Refer to Adjusting Regulator on page 46.
16. Run unit and inspect for leaks. Refer to Leak Test on page 71.
17. If no leaks detected, turn power Off (O) and unplug the unit.
18. Reinstall cabinet. Refer to Removing Cabinet on page 25.
Pressure
Sensor
Tubing
Adjustable
Clamp
Pressure
Adjustment Screw
(5/32-inch Allen
Wrench)
Pressure
Regulator
(Top)
Pressure
Regulator
NOTE: Sieve Beds removed for clarity.
NOTE: Regulator shown was used before
07/01/12.
Product
Tank
Sound Box
Product
Tank Lid
Product
Tank
Adjustable
Clamp
NOTE: The adjustable clamp hanger is not shown.
It is located behind the product tank and is attached
to the sound box.
DETAIL “A”
DETAIL “B” - 5 LITER
MODELS
Mounting
Screws
Pressure
Sensor
Tubing
Adjustable
Clamp
Pressure
Adjustment
Knob
Pressure
Regulator
(Top)
Product
Tank
DETAIL “C” - 9 LITER MODELS
Pressure
Regulator
Mounting
Screws
DETAIL “D” - ALL MODELS -
REGULATORS AFTER 06/30/12
NOTE: Regulator shown was used before 07/01/12
