Invacare PHOENIX PLUS, Service Manual

Page: 28 / 30

Tools Required:
No1 Phillips Screwdriver
Flat Bladed Screwdriver
8mm Spanner
13mm Spanner
4mm Allen Key
INSPECTION
STEP 1
Check all tubing for misalignment, damage or bending of the frame or crossbar assembly.
STEP 2
Check that no misalignment is present at the castor mount area (castor fork and socket).
STEP 3
Check all brazed/welded joints for fractures or damage.
STEP 4
Check the crossbar assembly is not damaged (pivot bolt should not be over-tightened).
STEP 5
Check the paint or chrome finish for damage or peeling.
STEP 6
Check that the chair folds easily and that the crossbar pivots and folding mechanisms oper-
ate correctly.
FRAMES AND CHASSIS
DISMANTLING
STEP 1
Remove the arm rest assemblies and footrest
STEP 2
Unplug and remove the battery boxes, joystick assembly and control box (see pages 10,19)
STEP 3
Remove the back assembly complete by removing the two hand knobs and pulling the push
handles upwards.
STEP 4
Remove the seat upholstery (see page 2).
23
Phoenix
11/01