Anti-tippers
92
13.2 Adjusting Anti-Tippers
1.
Press the release buttons (A) on the wheeled portion of the
anti-tipper and slide it up or down to achieve the 1
1
/
2
to 2-inch
clearance.
2.
Check to make sure that the release buttons are fully engaged in
adjustment holes.
FIGURE
2
WARNING
When anti-tippers are used, anti-tippers MUST be
adjusted to maintain a 1
1
/
2
to 2 inch clearance
between the bottom of the anti-tipper wheels and
the ground/ floor. This spacing should always be
checked whenever adjustments/changes are made
to the wheelchair. Failure to maintain proper
spacing may result in the chair tipping over
backward causing serious injury or property
damage.
A
1
1
/
2
to 2 inch
Clearance
