60126083-B
28
Flash Code
Fault Icon
Fault Description
Possible Action
6
Right magnetic brake fault
l
Check cables and connectors.
l
Ensure the right magnetic brake is engaged.
l
Refer to the “Pushing the mobility device in freewheel mode”
chapter in the wheelchair user manual.
l
Contact your provider.
7
Module fault (other than remote module)
l
Check cables and connectors.
l
Check modules.
l
Recharge the batteries.
l
If the chair was stalled, reverse away or remove any obstacles.
l
Contact your provider.
1 Configuration of the motors depends on the wheelchair model.
8.2 OON (“Out Of Neutral”)
OON (“Out Of Neutral”) is a safety feature that prevents accidental driving or seating movements when:
l
The system is powering up
l
After a function change
l
When the system comes out of an inhibit or drive lockout
8.2.1 Drive OON Warning
The joystick must be in the center position:
l
When a system is powering up
l
On a function change
l
When transitioning from a drive lockout or inhibit state
Otherwise, a drive OON warning displays. During a drive OON warning, the battery gauge LEDs and the drive wheel indicator (if
equipped) flash continually (all on, followed by all off) to alert the user. In this state the wheelchair does not drive.If the joystick is
returned to the center position, the warning clears and the wheelchair drives normally.
8.2.2 Seating OON Warning
When a system is powering up or after a function change, no direct access switches can be active; otherwise, a seating OON warning
displays.
During a seating OON warning, the battery gauge LEDs and the seating indicator flash continually (all on, followed by all off) to alert
the user. In this state the seating motions do not operate.If the switches are deactivated, the warning clears and the seating
motions operate normally.
8.3 Drive Inhibit Indication
The drive inhibit mode ensures the wheelchair does not drive when it is connected to the charger.
The following screen indicates the drive inhibit mode.
8 Troubleshooting