6
Installing the Bed Rails
READ AND UNDERSTAND WARNINGS before proceeding with Installing the Bed
NOTE: For this procedure, refer to FIGURE 4.
1. Pull and hold the plunger knob on the bed rail mounting bracket.
2. Insert the bed rail post into the bed rail mounting bracket.
3. Release the plunger knob.
4. Raise the bed rail until the plunger pin clicks securely into the adjustment hole, or
lower the bed rail until the top support of the bed rail rests securely against the top of
the bed rail mounting bracket.
5. Repeat STEPS 1-4 to install the remaining bed rail.
FIGURE 4
Installing the Bed Rails
Top Support Bar
Half Length
Bed Rail
Adjustment
Hole
Bed Rail Mounting Bracket
Plunger Knob
WARNING
Patient entrapment with bed side rails may cause injury or death. Mattress must fit bed frame
and side rails snugly to prevent patient entrapment. Follow the manufacturer's instructions.
Monitor patient frequently. Read and understand the Owner's/Operator's Manual prior to
using this equipment. Manual is available at www.invacare.com or your dealer.
P/N 1130183 Rev A - 11/04
