19
Storing, recalling, and erasing measurement data
Storing, recalling, and erasing
measurement data
•
Storing data
*After each measurement, the systolic and diastolic rates,
pulse rate and the time & date will be automatically stored.
The memory holds data for the latest 60 measurements in
each of 2 memory zones. If more than 60 measurements are
entered, the memory will automatically clear out the oldest
data.
Recalling data
*Press the "
" or "
" button to select the memory zone.
*Press the "MEMORY" button to get your stored memory
data. If there is no data in the memory nothing will appear.
*If there is data in the memory, the first reading
will be an average of the last three recorded set
of measurements (systolic and diastolic pressure
and pulse rate).
*Press the "MEMORY" button again and the lat-
est recorded set of measurements will appear
along with the recording time and date.
*Press the "
" button to read the next set of stored data.
The data displayed starts with the most recent reading and
continues backwards to the oldest.
•