Invacare isg4002647, Owner'S Manual

Page: 20 / 86

19
Storing, recalling, and erasing measurement data
Storing, recalling, and erasing
measurement data
•
Storing data
*After each measurement, the systolic and diastolic rates, pulse
rate and the time & date will be automatically stored. The memo-
ry holds data for the latest 40 measurements in each of 3 memory
zones. If more than 40 measurements are entered, the memory will
automatically clear out the oldest data.
Recalling data
*Press the " " or " " button to select the memory zone.
*Press the "MEMORY" button to get your stored memory data. If
there is no data in the memory nothing will appear.
*If there is data in the memory, the first reading will be
an average of the last three recorded set of measure-
ments (systolic and diastolic pressure and pulse rate).
*Press the "MEMORY" button again and the latest
recorded set of measurements will appear along with
the recording time and date.
*Press the "
" button to read the next set of stored data. The data
displayed starts with the most recent reading and continues back-
wards to the oldest.
*If your memory readings are out of range of your preset personal
alert levels, they will flash as explained in Setting Date, Time and
Levels.
*No Irregular Heartbeat Detector Record will be stored in memory.
•